Commercial Pool Service in Westlake, TX

Resort Style Pool Cleaning

Westlake community pools are built to a higher standard, with resort style finishes, multiple water features, and attached spas. We clean them on a cadence that keeps every surface, from the tanning ledge to the spa spillway, clear and inviting for residents and guests.

Precision Chemical Balancing

Premium finishes like PebbleTec and Wet Edge are more sensitive to calcium scaling and pH drift than standard plaster. We test and balance chlorine, pH, alkalinity, calcium hardness, and cyanuric acid every visit, with tighter tolerances, so the finish stays clean and the warranty stays intact.

Commercial Equipment Repair

Westlake pools run commercial grade pumps, multi zone automation, and dedicated feature plumbing for sheer descents, deck jets, and raised spas. When a feature pump fails or a zone controller drops offline, we diagnose it fast and carry common commercial parts so the amenity stays fully operational.

Inspections & Compliance Logs

Westlake HOA boards expect detailed reporting. We leave a logged record of water tests, chemical additions, equipment status, and feature operation after every visit, so the board has what it needs for health inspections and for tracking the condition of a high value amenity over time.

Custom Maintenance Plans

A Westlake community pool with a spa, three water features, and a tanning ledge needs a different cadence than a simple rectangular pool. We build a plan around the features, the finish, the bather load, and the season, so every part of the amenity gets the attention it needs without over servicing.

HOA & Property Management

We work directly with Westlake HOA boards, property managers, and estate management companies. One crew, one point of contact, and consistent service across every pool on the property, with the attention to detail that a premium amenity demands.

Westlake community pools run commercial grade equipment from Pentair, Hayward, Jandy, and Zodiac, often with multi zone setups that run the pool, the spa, the water features, and the lighting on separate circuits. These pads are more complex than a standard community pool, and our team stays current through continuing education so we can diagnose a zone controller issue or a feature pump failure without guessing.

For automation, we service IntelliTouch, EasyTouch, OmniLogic, and AquaLink systems, including the multi zone configurations that Westlake property managers use to control features remotely. When a system is past support or a part is discontinued, we tell the board straight and recommend a current replacement that fits the pad, the plumbing, and the budget.

On the chemical side, premium finishes like PebbleTec and Wet Edge are more sensitive to calcium scaling and pH drift than standard plaster. We use professional grade chlorine, balancers, and specialty treatments sized for commercial volumes, and we test chlorine, pH, alkalinity, calcium hardness, and cyanuric acid every visit with tighter tolerances to keep the finish clean and the warranty intact.

We also service commercial salt systems, UV and ozone sanitizers, and commercial LED lighting, including the color changing systems that many Westlake pools use for evening aesthetics. Whatever is on the equipment pad, we have likely seen it and fixed it before. We carry common commercial parts so many repairs finish in one visit.

We Inspect & Test

We walk the pool deck, check every water feature and the spa, and test chlorine, pH, alkalinity, and calcium hardness before we touch anything. Premium finishes need tighter tolerances, so we test more precisely.

We Clean & Balance

We skim, brush, vacuum, and empty baskets, then add the right chemicals to bring the water into range. We check the spa spillway and each feature for flow, because a clogged feature jet is a resident complaint waiting to happen.

We Check Equipment

We inspect the pump, filter, heater, automation, and every feature zone to make sure everything runs right. On multi zone pads, we confirm each zone is online and the schedules are correct.

We Log & Report

We leave a service log with water test results, chemicals added, equipment status, and feature operation so Westlake property managers and HOA boards have a clear record for inspections and amenity tracking.

Westlake HOA boards expect a pool service that treats the amenity like the high value asset it is. We work directly with boards and management companies to build a service plan that fits the features, the finish, and the budget. You get one crew, one point of contact, and consistent service that keeps the amenity looking and running the way residents expect.

We also handle the paperwork that comes with commercial pools. Every visit comes with a service log that covers water test results, chemical additions, equipment status, and feature operation. If we spot something that needs a repair, we flag it in the report and follow up with a written quote so the board can plan and approve without surprises.

Westlake community pools often have attached spas, multiple water features, and premium finishes that need year round attention, not just summer service. We build maintenance plans that keep the spa heated and balanced, the features flowing, and the finish protected through every season, with tighter chemical tolerances than a standard pool requires.

Every commercial service plan starts with a free walkthrough and a written quote. You will know the service scope, the cadence, and the reporting before anything starts.

Pool Cleaning Services

Weekly cleaning, chemical balancing, and skimming that keeps your water clear and swim-ready.

Pool Equipment Repairs

Pumps, filters, heaters, and automation repaired by a team trained on the latest gear.

Pool Installation

New pool builds designed for your yard, your home style, and the way you actually swim.

Pool Renovations

Resurfacing, tile, and full makeovers that bring an older pool back to life.

Pool Equipment Installation

New pumps, heaters, salt systems, and automation installed and set up the right way.