Pool Equipment Repairs in Southlake, TX
Fort Worth PoolSmiths repairs pumps, filters, heaters, salt systems, and automation for Southlake homeowners. Large family pools with heavy swim season use run the equipment hard, and our crew knows the strain that puts on pads across Timarron, Carillon, and South Ridge Lakes.
Pool Equipment We Fix Across Southlake
Large family pools and heavy swim season use put real strain on pool gear. We repair every piece on the equipment pad so your system keeps up with the demand.
Pool Pump Repair
Southlake's large family pools run the pump hard through heavy swim seasons, and that strain wears seals and bearings faster. We replace worn parts, clear impeller clogs, and restore flow before the motor overheats or trips the breaker.
Pool Filter Repair
Big pools with high bather load push more oil and debris through the filter than a standard pool. We service cartridge, DE, and sand filters, replace the media when it is spent, and verify the pressure gauge reads true so the filter catches what it should.
Pool Heater Repair
When a Southlake heater will not fire or hold temperature, we trace it to the flame sensor, the igniter, or the heat exchanger. We also check the gas pressure and the venting so the unit runs safely and efficiently through the cooler months.
Automation Repair
Southlake pools often run automation with salt systems and multiple features. We repair controllers that drop schedules, lose Wi-Fi, or stop actuating valves, and we rebuild the programs so the pump, heater, and lights run on their own again.
Salt System Repair
Salt cells on large Southlake pools scale up from hard fill water and from the high chlorine demand of heavy swim seasons. We acid-clean the cell, test the output, and read the board codes. If the cell is spent, we size a replacement and recalibrate.
Pool Light Repair
A dead or flickering pool light is usually a failed seal, a corroded socket, or a tripped GFCI. We pull the fixture, replace the bulb or the housing, and reseal the niche so water stays out and the light comes back on safely.
Equipment Brands We Work With
Southlake pools run a mix of Pentair, Hayward, Jandy, and Zodiac equipment, and each brand wires and programs its pumps, heaters, and automation a little differently. Our team stays current through continuing education on the latest models and firmware, so we pull the right part the first time instead of swapping components until something sticks.
On the pump side we work with IntelliFlo, SuperFlo, and MaxPro variable speed lines, plus the older single speed motors still running on many Southlake pads. For automation we handle IntelliTouch, EasyTouch, OmniLogic, and AquaLink, including the phone apps and remotes. When a part is discontinued, we tell you straight and recommend a current replacement.
For heaters we repair Pentair MasterTemp and Hayward Universal gas units, plus HeatPro and UltraTemp electric heat pumps. Heaters fail in specific ways, and the diagnostic codes point us to the exact sensor, igniter, or board that needs attention. We carry common parts so many Southlake repairs finish in a single visit.
For salt systems we service IntelliChlor, AquaRite, and NaturePure cells and control boards. We also install and repair LED lighting from Pentair, Hayward, and Jandy, including color lights and the controllers that run them. Whatever sits on your equipment pad, we have likely seen it and fixed it before.
How an Equipment Repair Visit Works
Three clear steps from diagnosis to a working pool, with a written quote before any work starts.
We Diagnose the Problem
We inspect the equipment, pull diagnostic codes, and test the unit under load to find the exact cause. We explain what is failing and why before we recommend anything.
We Send a Written Quote
You get a clear written quote for the part and the labor, with no pressure to decide on the spot. We answer your questions so you understand the fix and the options.
We Complete & Verify the Repair
Once you approve, we do the repair and run the equipment to confirm it works. We clean up the pad and leave a summary of what we fixed and what to watch for.
Pool Equipment Installation in Southlake
When a repair is not the smart move, we install new pool equipment sized to your pool and your pad. That includes variable speed pumps, filters, heaters, salt systems, automation, and lighting from the brands we service every day. We match the equipment to your pool's gallonage and plumbing so it runs efficiently from the first day.
A proper installation also means setting the pump speed, programming the automation, and calibrating the salt cell so the whole system works together. We do not just drop in a box and leave. We commission the equipment, walk you through how to use it, and make sure the pad is clean and up to code before we go.
We also handle equipment pad upgrades when you want to modernize an older Southlake setup. Swapping a single speed pump for a variable speed model, adding automation, or converting to a salt system can change how your pool feels and how much energy it uses. We plan the upgrade around your existing plumbing and electrical so there are no surprises.
Every installation starts with a free walkthrough and a written quote. There is no pressure, and no surprise charges get added later. You will know the equipment, the scope, and the timeline before any work begins.
Warning Signs You Need Pool Equipment Repair
Pool equipment usually fails slowly before it stops completely. Catching these signs early can save a motor, a heater, or a pump from a much bigger problem.
- A pump that grinds, whines, or runs louder than it used to
- Low or no water flow at the return jets, even when the pump is on
- Error codes or warning lights on the heater, salt cell, or automation panel
- Water pooling under the equipment pad or visible leaks at the fittings
Repair vs Replace: What We Recommend
We give you an honest read on whether a repair or a replacement makes more sense for your equipment. A worn seal or a single sensor on a newer pump is usually worth fixing, while a motor that has failed twice on a unit near the end of its life often points to a replacement. We look at the age of the equipment, the cost of the part, and how often it has failed before we recommend anything.
When a replacement is the better call, we give a free written quote for the new equipment and the install, and we explain why the repair would cost more in the long run. You always get both options laid out clearly so you can choose what fits your pool and your budget.
Equipment Not Running Right?
Get a free diagnostic visit and a written quote from a crew that fixes it the first time.
Get A Free EstimateNeighborhoods We Serve in Southlake
From the large family pools in Timarron to the salt system setups in Carillon, we know the pool gear across Southlake. Homes in South Ridge Lakes and Stone Lakes often run their pumps hard through heavy swim seasons, while pools in Monticello and Kirkwood Hollow benefit from consistent upkeep and trained diagnostics.
Other Pool Services in Southlake
We are a one-stop shop for all pool needs. Explore the other services our locally owned crew offers across Southlake.
Pool Cleaning Services
Weekly cleaning, chemical balancing, and skimming that keeps your water clear and swim-ready.
Learn morePool Installation
New pool builds designed for your yard, your home style, and the way you actually swim.
Learn morePool Renovations
Resurfacing, tile, and full makeovers that bring an older pool back to life.
Learn morePool Equipment Installation
New pumps, heaters, salt systems, and automation installed and set up the right way.
Learn moreCommercial Pool Service
Cleaning, chemistry, and equipment service for HOA, apartment, and community pools.
Learn morePool Equipment Repair FAQ
Common questions from Southlake homeowners about pool equipment repairs.
Southlake has a lot of large family pools that get heavy use through the swim season, and that means the pump runs longer and harder than it would on a smaller pool. The extra hours wear the shaft seal and the bearings faster, and high bather load pushes more oil and debris through the impeller. We replace the worn parts, clear the impeller, and show you how to keep the baskets emptied so the pump does not strain between service visits.
Let's Get Your Equipment Running Again
Call us or request a free estimate. A locally owned crew is ready to help.